dmesg - second run
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-25-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #37-Ubuntu SMP Thu Jun 6 20:47:07 UTC 2013 (Ubuntu 3.8.0-25.37-generic 3.8.13)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000a98c4fff] usable
BIOS-e820: [mem 0x00000000a98c5000-0x00000000a98cbfff] ACPI NVS
BIOS-e820: [mem 0x00000000a98cc000-0x00000000aa061fff] usable
BIOS-e820: [mem 0x00000000aa062000-0x00000000aa2e9fff] reserved
BIOS-e820: [mem 0x00000000aa2ea000-0x00000000b9563fff] usable
BIOS-e820: [mem 0x00000000b9564000-0x00000000b9a93fff] reserved
BIOS-e820: [mem 0x00000000b9a94000-0x00000000b9ad0fff] usable
BIOS-e820: [mem 0x00000000b9ad1000-0x00000000b9b81fff] ACPI NVS
BIOS-e820: [mem 0x00000000b9b82000-0x00000000b9ffefff] reserved
BIOS-e820: [mem 0x00000000b9fff000-0x00000000b9ffffff] usable
BIOS-e820: [mem 0x00000000bd000000-0x00000000bf1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System76, Inc. Gazelle Professional /Gazelle Professional , BIOS 4.6.5 06/13/2013
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x43fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FC0000000 write-back
2 base 00C0000000 mask 7FC0000000 uncachable
3 base 00BE000000 mask 7FFE000000 uncachable
4 base 00BD000000 mask 7FFF000000 uncachable
5 base 043FE00000 mask 7FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 1GB, type WB
reg 2, base: 3GB, range: 1GB, type UC
reg 3, base: 3040MB, range: 32MB, type UC
reg 4, base: 3024MB, range: 16MB, type UC
reg 5, base: 17406MB, range: 2MB, type UC
total RAM covered: 16334M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3024MB, range: 16MB, type UC
reg 3, base: 3040MB, range: 32MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
reg 6, base: 16GB, range: 1GB, type WB
reg 7, base: 17406MB, range: 2MB, type UC
e820: update [mem 0xbd000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xb9ffffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0xb9ffffff] page 2M
kernel direct mapping tables up to 0xb9ffffff @ [mem 0x1fffe000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x43fdfffff]
[mem 0x100000000-0x3ffffffff] page 1G
[mem 0x400000000-0x43fdfffff] page 2M
kernel direct mapping tables up to 0x43fdfffff @ [mem 0xb9acf000-0xb9ad0fff]
RAMDISK: [mem 0x34234000-0x36111fff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000b9b59088 0008C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000b9b65e38 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000b9b591a8 0CC8B (v02 ALASKA A M I 00000021 INTL 20091112)
ACPI: FACS 00000000b9b80080 00040
ACPI: APIC 00000000b9b65f48 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000b9b65fe0 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: ASF! 00000000b9b66028 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: SSDT 00000000b9b660d0 00F92 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
ACPI: SSDT 00000000b9b67068 00539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000b9b675a8 00AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: MCFG 00000000b9b68080 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000b9b680c0 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000b9b680f8 00315 (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000b9b68410 01949 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: SSDT 00000000b9b69d60 00DED (v01 SgRef SgPeg 00001000 INTL 20091112)
ACPI: DMAR 00000000b9b6ab50 00090 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043fdfffff]
Initmem setup node 0 [mem 0x00000000-0x43fdfffff]
NODE_DATA [mem 0x43fdfb000-0x43fdfffff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f400000-ffff88043f3fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x43fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0xa98c4fff]
node 0: [mem 0xa98cc000-0xaa061fff]
node 0: [mem 0xaa2ea000-0xb9563fff]
node 0: [mem 0xb9a94000-0xb9ad0fff]
node 0: [mem 0xb9fff000-0xb9ffffff]
node 0: [mem 0x100000000-0x43fdfffff]
On node 0 totalpages: 4165792
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 11789 pages used for memmap
DMA32 zone: 742662 pages, LIFO batch:31
Normal zone: 53240 pages used for memmap
Normal zone: 3354120 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000a98c5000 - 00000000a98cc000
PM: Registered nosave memory: 00000000aa062000 - 00000000aa2ea000
PM: Registered nosave memory: 00000000b9564000 - 00000000b9a94000
PM: Registered nosave memory: 00000000b9ad1000 - 00000000b9b82000
PM: Registered nosave memory: 00000000b9b82000 - 00000000b9fff000
PM: Registered nosave memory: 00000000ba000000 - 00000000bd000000
PM: Registered nosave memory: 00000000bd000000 - 00000000bf200000
PM: Registered nosave memory: 00000000bf200000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xbf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88043fa00000 s85056 r8192 d21440 u262144
pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4100693
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
------------[ cut here ]------------
WARNING: at /build/buildd/linux-3.8.0/drivers/iommu/dmar.c:481 warn_invalid_dmar+0x86/0xa0()
Hardware name: Gazelle Professional
Your BIOS is broken; DMAR reported at address 0!
BIOS vendor: American Megatrends Inc.; Ver: 4.6.5; Product Version: gazp9
Modules linked in:
Pid: 0, comm: swapper Not tainted 3.8.0-25-generic #37-Ubuntu
Call Trace:
[] ? warn_invalid_dmar+0x86/0xa0
[] warn_slowpath_common+0x7f/0xc0
[] warn_slowpath_fmt_taint+0x44/0x50
[] ? early_ioremap+0x13/0x15
[] ? __acpi_map_table+0x13/0x1a
[] warn_invalid_dmar+0x86/0xa0
[] ? bad_to_user+0x7c2/0x7c2
[] check_zero_address+0x57/0xf7
[] ? bad_to_user+0x7c2/0x7c2
[] detect_intel_iommu+0x15/0xb6
[] pci_iommu_alloc+0x49/0x70
[] mem_init+0x19/0xec
[] ? set_nmi_gate+0x48/0x4a
[] start_kernel+0x1e3/0x3dc
[] ? do_early_param+0x8e/0x8e
[] x86_64_start_reservations+0x130/0x133
[] x86_64_start_kernel+0x100/0x10f
---[ end trace 14a8cdcfd0dc0f9a ]---
Memory: 16286640k/17823744k available (7008k kernel code, 1160576k absent, 376528k reserved, 6234k data, 996k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.453 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.90 BogoMIPS (lpj=9577812)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26695 entries in 105 pages
dmar: Host address width 39
dmar: DRHD base: 0x00000000000000 flags: 0x1
dmar: parse DMAR table failure.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (38311.24 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xa98c5000-0xa98cbfff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xb9ad1000-0xb9b81fff] (724992 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000b9a89c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000b9a89618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000b9a88d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
CPU1: Package power limit notification (total events = 1)
CPU4: Package power limit notification (total events = 1)
CPU5: Package power limit notification (total events = 1)
CPU0: Package power limit notification (total events = 1)
CPU7: Package power limit notification (total events = 1)
CPU6: Package power limit notification (total events = 1)
CPU2: Package power limit notification (total events = 1)
CPU3: Package power limit notification (total events = 1)
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xbf200000-0xfeafffff]
pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 10: [mem 0xf7e14000-0xf7e17fff 64bit]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 10: [mem 0xf7e00000-0xf7e0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf7e1e000-0xf7e1e00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf7e1c000-0xf7e1c3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf7e10000-0xf7e13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf7e1b000-0xf7e1b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 24: [mem 0xf7e1a000-0xf7e1a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf7e19000-0xf7e190ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:0887] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xf7d00000-0xf7d01fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:04:00.0: [10ec:5289] type 00 class 0xff0000
pci 0000:04:00.0: reg 10: [mem 0xf7c00000-0xf7c0ffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.2: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.2: reg 10: [io 0xe000-0xe0ff]
pci 0000:04:00.2: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:04:00.2: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:04:00.2: supports D1 D2
pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xa98c5000-0xabffffff]
e820: reserve RAM buffer [mem 0xaa062000-0xabffffff]
e820: reserve RAM buffer [mem 0xb9564000-0xbbffffff]
e820: reserve RAM buffer [mem 0xb9ad1000-0xbbffffff]
e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
e820: reserve RAM buffer [mem 0x43fe00000-0x43fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x1c00-0x1cfe] has been reserved
system 00:04: [io 0x1d00-0x1dfe] has been reserved
system 00:04: [io 0x1e00-0x1efe] has been reserved
system 00:04: [io 0x1f00-0x1ffe] has been reserved
system 00:04: [io 0x1800-0x18fe] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: [io 0x3322-0x3323] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x1854-0x1857] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: Plug and Play ACPI device, IDs ETD0403 PNP0f13 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xf7ffe000-0xf7ffefff] has been reserved
system 00:0b: [mem 0xf7fe0000-0xf7fe0fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xbf200000-0xbf3fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xbf400000-0xbf5fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xbf200000-0xbf3fffff]
pci 0000:00:1c.0: bridge window [mem 0xbf400000-0xbf5fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xbf200000-0xfeafffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xbf200000-0xbf3fffff]
pci_bus 0000:02: resource 2 [mem 0xbf400000-0xbf5fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 31608k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb5564000-0xb9564000] (64MB) mapped at [ffff8800b5564000-ffff8800b9563fff]
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1372808383.684:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 31871
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (14 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1c000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-25-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-25-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-25-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-25-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:ELNM] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: dbae232d36ad7257df58e2fefc4fab11a387ce7c'
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:05: setting system clock to 2013-07-02 23:39:44 UTC (1372808384)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 996k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1172k freed
Freeing unused kernel memory: 1080k freed
udevd[133]: starting version 175
Disabling lock debugging due to kernel taint
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x35 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
[drm] Initialized drm 1.1.0 20060810
rtsx_pci 0000:04:00.0: irq 43 for MSI/MSI-X
rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 43
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.2: irq 44 for MSI/MSI-X
r8169 0000:04:00.2 eth0: RTL8411 at 0xffffc90001848000, 00:90:f5:e7:8b:1d, XID 08800800 IRQ 44
r8169 0000:04:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
wmi: Mapper loaded
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 42
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a200 irq 42
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a300 irq 42
ata6: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a380 irq 42
[drm] Memory usable by graphics device = 2048M
i915 0000:00:02.0: setting latency timer to 64
[drm:i915_write32] *ERROR* Unknown unclaimed register before writing to c5100
i915 0000:00:02.0: irq 45 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: MATSHITADVD-RAM UJ8C0, 1.00, max UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C0 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata3: SATA link down (SStatus 0 SControl 300)
usb 3-7: new full-speed USB device number 2 using xhci_hcd
usb 3-7: New USB device found, idVendor=8087, idProduct=07da
usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
tsc: Refined TSC clocksource calibration: 2394.455 MHz
Switching to clocksource tsc
usb 3-8: new high-speed USB device number 3 using xhci_hcd
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ATA-9: M4-CT256M4SSD3, 07MH, max UDMA/100
ata5.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: configured for UDMA/100
scsi 4:0:0:0: Direct-Access ATA M4-CT256M4SSD3 07MH PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 4:0:0:0: [sda] Attached SCSI disk
usb 3-8: New USB device found, idVendor=5986, idProduct=0400
usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-8: Product: BisonCam, NB Pro
usb 3-8: Manufacturer: Bison
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: ATA-8: ST9750420AS, 0001SDM5, max UDMA/133
ata6.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST9750420AS 0001 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 5:0:0:0: [sdb] 4096-byte physical blocks
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI disk
[drm:intel_dp_set_link_train] *ERROR* Timed out waiting for DP idle patterns
[drm:i915_write32] *ERROR* Unknown unclaimed register before writing to 64040
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
xor: automatically using best checksumming function:
avx : 23816.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
Btrfs loaded
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Adding 4194300k swap on /dev/sda3. Priority:-1 extents:1 across:4194300k SS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[521]: starting version 175
microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x8
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 46 for MSI/MSI-X
lp: driver loaded but no devices found
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20121018/utaddress-251)
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20121018/utaddress-251)
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPR_ 3 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20121018/utaddress-251)
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20121018/utaddress-251)
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPR_ 3 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
type=1400 audit(1372808387.158:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=772 comm="apparmor_parser"
type=1400 audit(1372808387.158:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=771 comm="apparmor_parser"
type=1400 audit(1372808387.158:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=772 comm="apparmor_parser"
type=1400 audit(1372808387.158:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=771 comm="apparmor_parser"
type=1400 audit(1372808387.158:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=772 comm="apparmor_parser"
type=1400 audit(1372808387.158:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=771 comm="apparmor_parser"
device-mapper: multipath: version 1.5.1 loaded
cfg80211: Calling CRDA to update world regulatory domain
usbcore: registered new interface driver btusb
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:03:00.0: irq 47 for MSI/MSI-X
iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x8
microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x8
microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x8
microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x8
microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x8
microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x8
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x8
microcode: Microcode Update Driver: v2.00 , Peter Oruba
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
Linux video capture interface: v2.00
snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0400)
input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
init: failsafe main process (1215) killed by TERM signal
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
type=1400 audit(1372808387.582:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1329 comm="apparmor_parser"
type=1400 audit(1372808387.582:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1328 comm="apparmor_parser"
type=1400 audit(1372808387.582:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1333 comm="apparmor_parser"
ppdev: user-space parallel port driver
init: avahi-cups-reload main process (1357) terminated with status 1
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
psmouse serio2: elantech: assuming hardware version 3 (with firmware version 0x450f02)
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
psmouse serio2: elantech: Synaptics capabilities query result 0x79, 0x17, 0x0c.
iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:04:00.2 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input12
Netfilter messages via NETLINK v0.30.
device eth0 entered promiscuous mode
device wlan0 entered promiscuous mode
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x290 offMax=0x3948
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004).
vboxpci: IOMMU not found (not registered)
init: plymouth-stop pre-start process (1991) terminated with status 1
wlan0: authenticate with c0:3f:0e:b6:0a:ce
wlan0: send auth to c0:3f:0e:b6:0a:ce (try 1/3)
wlan0: authenticated
wlan0: associate with c0:3f:0e:b6:0a:ce (try 1/3)
wlan0: RX AssocResp from c0:3f:0e:b6:0a:ce (capab=0x411 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
CPU5: Core power limit normal
CPU2: Core power limit normal
CPU4: Core power limit normal
CPU6: Core power limit normal
CPU1: Core power limit normal
CPU0: Core power limit normal
CPU3: Core power limit normal
CPU7: Core power limit normal
CPU2: Package power limit normal
CPU4: Package power limit normal
CPU6: Package power limit normal
CPU1: Package power limit normal
CPU0: Package power limit normal
CPU3: Package power limit normal
CPU7: Package power limit normal
CPU5: Package power limit notification (total events = 417348)
CPU1: Core power limit notification (total events = 694780)
CPU5: Core power limit notification (total events = 694784)
CPU0: Core power limit notification (total events = 694771)
CPU4: Core power limit notification (total events = 694772)
CPU5: Package power limit notification (total events = 707782)
CPU0: Package power limit notification (total events = 707760)
CPU4: Package power limit notification (total events = 707760)
CPU6: Core power limit notification (total events = 694825)
CPU2: Core power limit notification (total events = 694808)
CPU3: Core power limit notification (total events = 694811)
CPU7: Core power limit notification (total events = 694817)
CPU6: Package power limit notification (total events = 707791)
CPU2: Package power limit notification (total events = 707787)
CPU3: Package power limit notification (total events = 707787)
CPU7: Package power limit notification (total events = 707795)
CPU1: Package power limit notification (total events = 707774)
CPU6: Core power limit normal
CPU2: Core power limit normal
CPU1: Core power limit normal
CPU5: Core power limit normal
CPU0: Core power limit normal
CPU4: Core power limit normal
CPU7: Core power limit normal
CPU3: Core power limit normal
CPU2: Package power limit normal
CPU1: Package power limit normal
CPU5: Package power limit normal
CPU0: Package power limit normal
CPU0: Core power limit notification (total events = 1010076)
CPU4: Core power limit notification (total events = 1010077)
CPU1: Core power limit notification (total events = 1010085)
CPU5: Core power limit notification (total events = 1010089)
CPU4: Package power limit notification (total events = 1032247)
CPU1: Package power limit notification (total events = 1032259)
CPU5: Package power limit notification (total events = 1032267)
CPU7: Core power limit notification (total events = 1010124)
CPU3: Core power limit notification (total events = 1010118)
CPU2: Core power limit notification (total events = 1010112)
CPU6: Core power limit notification (total events = 1010129)
CPU7: Package power limit notification (total events = 1032284)
CPU3: Package power limit notification (total events = 1032276)
CPU2: Package power limit notification (total events = 1032270)
CPU6: Package power limit notification (total events = 1032274)
CPU0: Package power limit notification (total events = 1032246)
CPU0: Core power limit normal
CPU4: Core power limit normal
CPU1: Core power limit normal
CPU5: Core power limit normal
CPU4: Package power limit normal
CPU2: Core power limit normal
CPU3: Core power limit normal
CPU7: Core power limit normal
CPU6: Core power limit normal
CPU1: Package power limit normal
CPU5: Package power limit normal